A reasonable design of fully automatic millet processing unit introduction

　　In order to solve the problems of complex structure and poor sorting effect of the traditional millet processing unit, there is a new type of fully automatic millet processing unit. The feed control board is also connected with the drive shaft of the husking roller through a crank-slider structure. There is a shelling chamber under the hopper, a shelling roller is arranged in the shelling chamber, an air selection chamber is arranged below the dehulling chamber, one side of the air selection chamber is provided with an air selection board, and the other side is provided with a baffle plate and a skin outlet. There is a flotation auger driven by a flotation motor at the bottom of the flotation chamber. Let’s take a look at this reasonably designed millet processing unit.

　　The processing chamber is provided with a conveyor belt on one side of the throwing direction of the throwing parts, and a drying plate is arranged in the conveyor belt, and the drying plate abuts the inner diameter of the conveyor belt; the position of the processing chamber facing the upper end face of the conveyor belt is provided with an air-drying cavity, and the air-drying cavity is communicated with the blower through a pipeline; A discharge part is also provided under the end of the conveyor belt away from the throwing part. One end of the air selection disc is communicated with the blower, and the other end is provided with a plurality of horizontal notches. There is a froth baffle at the end of the water outlet away from the flotation motor to prevent the froth from contacting the flotation screw.

　　The throwing assembly includes a rotating shaft, a crank and a pulley, and the rotating shaft is rotatably connected to the processing chamber; a plurality of throwing plates are evenly distributed on the outer diameter of the rotating shaft; the end of the throwing plate away from the rotating shaft is arc-shaped; the pulley is fixed at one end of the rotating shaft; the crank It is rotatably connected in the processing chamber for driving the pulley to rotate intermittently. There are dense water passage holes on the throwing plate, which are used to separate the rice and the flotation liquid during the throwing process. The discharge assembly includes a discharge motor and a discharge auger, and the end of the discharge auger far from the discharge motor is provided with a finished product discharge port.

　　There are many processing equipment in the food processing industry, such as rice processing equipment, corn processing equipment, millet processing unit, etc. In fact, the equipment is more than that. The processing is to choose the appropriate processing equipment according to your own processing needs. This millet processing unit can clear the Grains, stone removal, peeling. The stages of grinding and polishing are carried out automatically and continuously, the process is very smooth, and the maintenance is also very convenient. Through the wind separation, flotation and drying processes, the millet is peeled, impurity removal and drying in sequence, and the obtained finished rice has high purity and no impurities. Low production cost, suitable for promotion.

　　Learn more about rice processing equipment, millet processing unit, corn deep processing machinery, corn processing equipment, grain processing equipment: www.wintone-machinery.com