Production Capacity
Finished Products
Application
Main Equipment
Application:Drying, cooling, humidifying and other operations of powder and granular materials
Capacity:Fluid bed area 0.9-9㎡
The vibrating fluidized bed dryer is widely used for drying, cooling, humidifying and other operations of powder and granular materials in the industries of grain and oil, chemical industry, light industry, medicine, food, plastics, slag, salt, sugar and other industries.
Materials enter the ZLG vibrating fluid bed dryer via material inlet, perform continuous forward movement in horizontal direction under the action of vibration force. Meanwhile, hot wind passes through fluid bed and the materials are heated continuously. Then, wet air is dedusted by cyclone separator and exhausted via air outlet. At this time, dry materials are discharged via dedicated discharge gate.
The fluidized-bed dryer employs a specially structured dispersion plate to create a uniform fluidized state, which prevent products from uneven drying.
The desired retention time can be set by adjusting the height of the fluidized bed by controlling discharge rate of dried material.
The moving speed of the bed depth and the material in the dryer can achieve stepless adjustment by the changes of the amplitude.
By installing a heating element inside dryer, higher thermal efficiency can be obtained and the dryer size and amount of exhaust gas becomes smaller.
Effectively prevent the cross-contamination of the materials and air, clean operation environment.
Materials have been heated evenly, full exchanged the heat. Flows stability, with no dead angle and blown through phenomenon.
The material has been feed into the machine, under the dual function of the vibration and air flow, the material move along the fluidized bed as throwing forward continuously. Hot air upward through the fluidized bed and wet materials from the heat after the exchange, after the cyclone dust emissions from dry materials from discharging from the mouth.
Model (ZLG) | Fluid bed area (m2) | Inlet air temperature (°C) |
Outlet air temperature (°C) |
Moisture evaporation capacity (kg/h) |
Vibration motor | |
Model | Power (KW) | |||||
3×0.3 | 0.9 | 70-140 | 40-70 | 20-35 | ZDS31-6 | 0.8×2 |
4.5×0.3 | 1.35 | 70-140 | 40-70 | 35-50 | ZDS31-6 | 0.8×2 |
4.5×0.45 | 2.025 | 70-140 | 40-70 | 50-70 | ZDS32-6 | 1.1×2 |
4.5×0.6 | 2.7 | 70-140 | 40-70 | 70-90 | ZDS32-6 | 1.1×2 |
6×0.45 | 2.7 | 70-140 | 40-70 | 80-100 | ZDS41-6 | 1.5×2 |
6×0.6 | 3.6 | 70-140 | 40-70 | 100-130 | ZDS41-6 | 1.5×2 |
6×0.75 | 4.5 | 70-140 | 40-70 | 120-140 | ZDS42-6 | 2.2×2 |
6×0.9 | 5.4 | 70-140 | 40-70 | 140-170 | ZDS42-6 | 2.2×2 |
7.5×0.6 | 4.5 | 70-140 | 40-70 | 130-150 | ZDS42-6 | 2.2×2 |
7.5×0.75 | 5.625 | 70-140 | 40-70 | 150-180 | ZDS51-6 | 3.0×2 |
7.5×0.9 | 6.75 | 70-140 | 40-70 | 160-210 | ZDS51-6 | 3.0×2 |
7.5×1.2 | 9 | 70-140 | 40-70 | 200-260 | ZDS51-6 | 3.0×2 |
Due to the conversion period of some equipment updates and network display, the picture and text parameters of the page may be different from the actual equipment. The content of the picture and text on the page is not the actual purchase basis. The actual equipment configuration determined by the specific model and technical parameters shall prevail.Contact the sales manager in time to confirm, the company reserves the right to change the picture parameters and final interpretation.
If you need equipment plans and quotations, you can leave a message below to tell us.
The complete set of corn grits, flour, and germ extraction projects are designed with a new type of dry corn finishing line, which is suitable for food factories, breweries, oil factories, etc.
The oat flakes processing solution is a complete set of processing technology of oat shelling, cooking and flaking mill developed according to the characteristics of oats at home and abroad, with wide adaptability and strong flexibility.