Operation process of rice processing equipment

There are many types of rice processing equipment, and different types of equipment have different effects. The following is an introduction to the operation process of rice processing equipment.

1. Operation procedure of initial cleaning of circular sieve

Observe the flow rate of the initial cleaning screen of the cylinder at any time, and control the size of the feeding door to ensure that the subsequent process does not drop material during the processing and cleaning process. And remove the large miscellaneous and straw ropes and other sundries in the round sieve in time.

2. Self-balancing vibrating screen operating procedures

Control the flow of materials on the screen surface, remove impurities on the screen surface in time, adjust the air volume of the vertical suction hood, and the distance between the air selection plates to ensure the air selection effect of the amount of impurities absorbed.

3. Operation procedure of stone removal machine

Adjust the size of the damper and the flow rate to maintain the thickness of the material on the screen surface of the stone removal machine to ensure the stone removal effect. During the operation, the damper should be gradually increased, and should not be increased sharply, so as to prevent the rice from being sucked away by the wind.

4. Frequently check whether the controller of the pulse dust collector is working normally

Whether the air pump is running normally, check whether there is dust discharged from the air outlet of the fan. If there is dust, check whether the cloth bag in the pulse dust collector is detached or perforated. Find problems and deal with them in a timely manner.